RetroTink COMP2RGB - Component to RGB Adapter

(No reviews yet) Write a Review
RetroTink COMP2RGB - Component to RGB  Adapter

 Please Note: Includes Device only, a micro USB cable is required for power (you can also power off of a USB port on a TV or any other power adapter designed for USB) 

Analog transcoder to convert component YPbPr to RGBs

  • Injection molded enclosure
  • Multi-format support: 240p/288p/480i/576i, 480p, 720p, 1080i, 1080p
  • Automatic switching between Rec. 601 and Rec. 709 conversion matricies depending on input resolution
  • Includes microUSB cord. Due to the many different types of plugs, we don't include an AC adaptor. Use a clean, good quality USB power adaptor or the USB port on your TV or monitor, if possible.

How to Use

The COMP2RGB is designed to be a high quality transcoder that is extremely simple to use.

Plug in a microUSB power source. The COMP2RGB is low-power device and any microUSB power adaptor or USB port should be sufficent.

Connect the RCA component input and the SCART RGB output to the device. Power up your source and set your display to accept the SCART connection.

You're done!