null

Extra AV Out for OSSC Pro (Open Source Scan Converter)

€50.81
(1 review) Write a Review
WIN $300 FOR WRITING A REVIEW! LEARN MORE
SKU:
SAGOSSCXTRAOUT[MM-3G]
Extra AV Out for OSSC Pro (Open Source Scan Converter)

Extra AV Out for OSSC Pro (Open Source Scan Converter) v1.2

Easily use your OSSC Pro with your classic VGA monitor or CRT television* with the Extra AV Out expansion card. Fantastic for users who want to experiment with down-scaling
or converting modern games for use on classic CRT displays. The card plugs into the side of the OSSC Pro and gives the device the following additional outputs:

  • 1 x D-Sub 15 (VGA) output (15khz and 31khz output supported, up to 1080p)
  • 1 x 3.5mm audio output (see the table below for compatibility information)
  • 1 x SPDIF/digital audio output (see the table below for compatibility information)

* Connection to CRT televisions may require additional hardware to convert to SCART or component video. A specially designed AV adapter to allow easy connection to SCART
televisions is possible. A case/enclosure for the expansion card is also planned.

While using the Extra AV Out card, the original digital video output on the OSSC Pro remains active at all times and can be used to feed a secondary display or monitor.
Please note that the video signal from both the analogue and digital outputs will be the same resolution and refresh rate, it is not currently possible to send a different signal to each output.

RGB video output quality from the board is excellent and, unlike many affordable DAC (digital to analogue converters) on the market, consistently excellent too.

The connectors on the extra AV out board are output only, they cannot be used as additional inputs.

The table below has details of the currently supported audio formats for the Extra AV Out board (correct as of firmware 0.74).

Input3.5mm outputSPDIF output
AV1-3 Analogue            Yes            No (support planned in future firmware)
Toslink LPCM 2.0            No (Support planned in future firmware)            Yes
Toslink DD5.1/DTS            No (not possible)            Yes
AV4 LPCM 2.0            Yes            No (support planned in future firmware)
AV4 LPCM 7.1            Yes (front two channels only)            No (support planned in future f/w for front two channels only)
AV4 DD5.1/DTS            No (not possible)            Yes

 Includes 3D printed shell

 

1 Review

  • 5
    Extra AV Out OSSC PRO

    Posted by xndr271 on Nov 30th 2024

    This is a necessary device for those who plan to output a scalable analog signal to their CRT monitor or other equipment.
    It`s great that such an add-on exists.