2-Port USB Controller Adapter for Nintendo 64, Switch, PC, and Mac - Hyperkin

1 Review

• 4

  it works, expect setup

  Posted by ryan on Jan 17th 2026

  I used this adaptor with an Old Skool N64 gamepad and it works, but keep in mind that if connected to a PC this adaptor is what is `seen` by the computer, not necessarily the pad. It pretends to be a switch pro gamepad. The adaptor outputs DINPUT, so make sure whatever replicator you use understands that. Gopher64 will work. when you plug this in, replicators and your computer see it as 2 gamepads connected at once, (even if you only have one plugged in) and the right side port is port 1. the PC - CONSOLE switch is on the back and the nintendo switch home button and `minus` are on front. the front buttons will rattle if you shake it. the adaptor has rubber feet so it won`t get dragged around. don`t expect a long cable.
  works on linux, but remember, it is DINPUT not XINPUT.
  the packaging is one of those `have powerful scissors` ones. watch out because there is an instruction manual inside. the usb is usb A.
  rumble support is not carried through with this adaptor, tested with a reproduction gamepad and reproduction rumble pak. hyperkin`s other nintendo adaptors don`t appear to have rumble either (see their gamecube adaptor)
  you might but may not get rumble if you connect this adaptor to ANOTHER adaptor (a blue retro, but do at your own risk).
  A raphnet adaptor WILL give you rumble.