PLEASE NOTE: Modding/Installation Services typically take 2 - 5 days from the time we receive the console.

MOD CHIPS: Mod chips should have no affect on this modification. However, Stone Age Gamer offers no responsibility for a preexisting modifications. While rare, there could be a scenario where Stone Age Gamer has to replace your motherboard. We would not replace or reimburse the customer for any preexisting modification. If for some reason your modification is found to be incompatible with the LaserBear Blue Retro Internal Adapter for the GameCube product Stone Age Gamer is not responsible for replacing or reimbursing the customer.

AFTER PURCHASING

You may send console in at anytime after purchasing or if you want to wait we automatically e-mail you once stock is about to arrive.

Ship just your GameCube with invoice to:
(please no AV cables, power cables, or accessories)
Stone Age Gamer - LaserBear BR GC
378 E. State St.
Salem, OH 44460
U.S.A.

PLEASE READ: We highly suggest insuring your shipment to us. We are not responsible for any damage until the console is received and inspected. Your console must be in working order when inspected. We are not a repair service, we only provide the installation of the LaserBear Blue Retro Internal Adapter for the GameCube product. Do NOT ship your console to us without purchasing this service first.

Use modern Bluetooth controllers on your GameCube without the need for a dongle! 

The Blue Retro Internal Adapter is an internal mod that allows you to use a combination of standard and Bluetooth controllers without the need for a dongle. This new board allows for the use of up to 4 connected Bluetooth controllers, and can be mixed and matched with wired controllers on any of the ports for seamless operation. Simply pair your Bluetooth controllers and you're ready to go. Plugging in any standard controllers will automatically move connected Bluetooth controllers to the next available open slot. 

More information can be found in the Install Guide and User Guide linked below.  

Install Guide

User Guide

Features:

• Up to 4 Bluetooth controllers can be paired at once.
• Wired controllers are still usable.
• When a wired controller is connected it the Bluetooth controllers will move to open ports automatically.
• LEDs in each port to indicate where a controller is connected
• Remote power control of the console via macro controls
• Remote in game reset via macro controls
• Easy firmware update tool that only requires a Bluetooth enabled device like a phone or computer
• Multi-function reset button
• Configurable button mapping using the web interface on a computer or phone
• Replaceable socket for CR2032 (not included due to shipping limitations)
• Simple installation requiring only screwdrivers (Gamebit 4.5mm and Philips #2)

Compatible Controllers

This GitHub Link has detailed list of compatible controllers and how to pair each type to Blue Retro
https://github.com/darthcloud/BlueRetro/wiki/Controller-pairing-guide

• PlayStation 3 (see pairing guide above)
• PlayStation 4/5
• Xbox One/Series X/S
• Switch Controllers (Only one Switch Controller paired to the console at this time is supported this is a bug that has not been found)
• 8BitDo (xinput mode)
• Wii Controllers
• Generic HID Bluetooth controllers (Note not all controllers will universally work there is the potential you can help us support new devices see the guide above for details)
• Bluetooth Keyboards (emulate the ASCII Keyboard Controller)

Remote Power Down

This adapter taps into the incoming power of the GameCube allowing for it to act as a power switch. Using the following button combination the system will power down. 

Left Trigger, Right Trigger, Start (Start/Option/etc) and face button down. When released at the same time the macro action will happen. 

This powers off the GameCube in the same way that the main power switch would normally power off the system. To wake it back up you just need to power the controller back on, or hit the reset button to wake the console. (Note when powered off in this manner the main power switch will not wake the console only a Bluetooth controller or the reset button will wake it back up)

Reset Button

The reset button on the console has been converted to offer new functionality based on how long you hold the button down. While it is being pressed the front ports will light up to show which state you will be enabling.

Holding for 0-3 seconds will perform the same action as on a stock console, reset.
In this state all four front port LEDs will be solid on

Holding for 4-6 seconds will disconnect all connected Bluetooth controllers 
In this state all four front port LEDs will be slowly blinking

Holding for 7-9 seconds will enable pairing mode
In this state all four front port LEDs will be blinking faster

Holding for 10 seconds or more will factory reset to the original firmware and remove any custom configs
In this state all four front port LEDs will be blinking rapidly

When the system is placed in power down mode the reset button will wake it with a single press.

If you power the system off with the main power button, and hold reset while powering on the BlueRetro adapter will be in sleep mode and will not interfere with the console use this in the event that a peripheral is not working nicely with BlueRetro