This is a modified Spice Orange Nintendo Gamecube Console. It includes a GC Loader which has a matching 3D Printed Mount installed. You will need to add your own SD card with files for this device. The digital AV port (For the high priced component cable) has been removed. It has been replaced with an HDMI card / port (Pluto-IIx XC3S200 FPGA). This output will allow you hook up the GameCube to newer TV's and enjoy a much higher quality picture. The HDMI mod is capable of sending digital audio through HDMI in Enhanced DVI mode (there is an option for this in the settings). There are many settings you can configure for the digital output. You can bring this embedded menu up by holding L+R+X+Y for about 3 seconds. Standard resolutions for this mod are 240p, 288p, 480i, 576i, 480p, and 576p. Most TV's will upscale from these resolutions, but please check your TV's specifications to make sure it can handle one of these signals (we cannot cover return shipping in cases where the TV was unsupported). These are used consoles which have been thoroughly tested, but may have some minor nicks/chips/blemishes. We cannot accept returns due to condition issues, please refer to the pictures before purchasing as they are the actual item you will receive. We provide a 90 day warranty for these used consoles, and can also offer paid support once the warranty expires.
PLEASE NOTE: This console does not include any other accessories. Controllers and cords are available separately in our gamecube section if you need them.
*This console has been set to default to English instead of the default Japanese language