Insurrection Industries Super Nintendo RGB SCART Cable (w/ csync) SNES

(3 reviews) Write a Review
Insurrection Industries  Super Nintendo RGB SCART Cable (w/ csync) SNES

Get the best quality from your Console with RGB SCART cables.  These cables support Csync.


  • Double external shielding with braid and foil
  • Independently shielded stereo audio to reduce noise
  • Independently shielded RGB video to reduce noise
  • Independently shielded sync signal to reduce interference and video noise
  • Pure copper 24 AWG multi-stranded wires used for all color, sync and audio signals for maximal signal quality
  • All cables use very high quality Nichicon UHV capacitors where needed
  • Every cable is designed with industry standard impendence and signal level characteristics for maximal compatibility and performance



  • This cable is for NTSC region Super Nintendo/Super Famicom consoles only! Using with other consoles may cause damage to the console or display device
  • We can not guarantee that this cable will work with modified consoles   
  • This cable will only work for modified consoles (Such as the N64) which are configured to output TTL (unattenuated) C-sync to pin 3 of the AV multi-out 
  • Wired for dedicated C-sync signal by default, this may not be compatible with all consoles and display devices
  • We provide a limited warranty for a duration of one year from the date of purchase
  • We will repair or replace any item which is not functioning correctly due to manufacturing defects
  • We do not accept returns or issue refunds once an order has been placed

3 Reviews

  • 1
    Audio and Video Noise

    Posted by Raikusu on Nov 18th 2022

    The cable fits poorly and can become unplugged easily if the console is moved. The av connector pins are made of zinc instead of copper or gold which provides better conductivity. There is noticeable video noise and audio noise.

    These cables are not fully shielded. Only the csync wire and L R audio wires are shielded. This leaves the RGB wires subject to noise. Also the wires are thin inside which makes them subject to more noise. These cables are not better than cheap generic scart cables you can find online. You should get a proper shielded scart cable that has each wire individually shielded and has copper pins instead of zinc.

    I shipped this cable (and a Genesis 2 cable) to Insurrection Industries address after I emailed them about checking for defects in the cable because of the audio and video noise. They held on my cables for two months without checking them to see if they performing correctly. I kept messaging them for an update and they said that they were busy and will check them when they can.

    After two months of waiting, they finally shipped the cables back to me. They said that the cables met "acceptable" noise standards. I don't see how noticeable audio and video noise can be considered acceptable. They were slow with testing the cables I bought from their website and did not always respond to emails I sent to them asking for updates.

    Retro access have scart cables that are priced similarly but offer better noise cancelling and have copper pins. They also have better customer service compared to Insurrection.

  • 5
    Insurrection Cysnc SCART cable.

    Posted by Dan W. on Jun 16th 2021

    Works as intended on my modded 1chip.

  • 5
    Gold standard in RGB cables

    Posted by NuVanDibe on May 26th 2021

    I've tried multiple RGB cables. This is the only one that has ZERO noise and gives the clearest signal I've ever seen. Behind my Retrotink 5X, I can't tell the difference between an original SNES and emulation anymore. If you can use RGB, you definitely want this cable.